site map русс.версиярусская версия
contacts  

 

 
AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING А0115:
AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING is designed for manufacture of nettings with square and rhombic meshes of the "Rabitsa" type out of wire of 2 - 3 mm in diameter with rated mesh side dimension of 20 - 60 mm.

AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING А0115
 
MATERIAL USED:

Low carbon non-heat treted wire, or galvanized wire of normal accuracy.

 
ADVANTAGES:
  • The feed is improved by means of application of special unreelers.
  • Possibility of bending the cut netting ends.
  • Possibility of reeling of the manufactured netting into rolls due to a special reeling device.
  • Safety of maintenance is provided by reliavle casing of dangerous operation areas.
 
SPECIFICATIONS:
Wire diameter, mm
2,0-3,0
Netting width, max, mm
1000-2500
Mesh side dimension, mm
20-60
Reeling knife revolutions per min.
maximum
minimum
640
100
Number of gears of reeling knife
6
Way of knife change
stepped
Electric motor power, kw
4,36
Overall dimensions (without reeler and unreeler), mm
5000x1100x1500
Mass, kg
3500
 

NOTE:

1. AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING is delivered with a set of tools for manufacture of wire netting with square meshes of 45 or 60 mm one side. The tools for production of wire netting of different dimensions and shape are delivered to a separate
order.
2. The machine capacity depends on mesh demension, netting width, quality of tools.

 

 

GoldenStyle - web-design

 

Voting of site OUR PHONES
Wire-nail machines, Spring coiling machines, Washer making machines, Cutting straightening machines,
Machines for making metal screens, Machines for producing barbed wire, Line for manufacturing the slate nailp, Small-sized machine tools