Cold rolled strip out of low carbon hardened and semihardened steel, normal accuracy.

- Quick pay-back due to high capacity.
- High reliability and long-term operation since all critical parts are made out of high quality materials.
- Easy access to component mechanisms which allows for quick and ready readjustment.
- Maintenance safety, since all moving parts are covered with casings.
- Possibility of control of several machines by one operator.

In order to enhance technological capabilities of nailing machines our company has developed the following options:

1. Auger device. It is designed for transportation of nails from under the tray into the container. Thus, during transportation of nails cut-offsare separated and sent to a separate container.

This will allow:

1. to avoid the deburringin many cases, e.g. for construction nails, which would reduce costs;
2. cut-off separated from of the nails can be handed into scrap metal, which also would reduce costs;
3. to escape from use of the place for container with nails, which would save production area;

2. The second lubrication circuit. This centralized lubrication is driven by a separate electric drive. It works on thethick lubricant through dosed feeders. Lubrication is triggered periodically, for example, after 1 hour and it delivers a portion of the lubrication to points.

Lubricated points:

1. Slide rails of cut (6 points);
2. The axis of the lever clamp - 1 point;
3. The lever clamp roller - 1 point;
4. Top rail of slide landing - 2 points;
5. Telescopic connection of feed lever - 1 point.

This allows: 

1. significantly reduce fattening of nail and thus to escape thedeburringof nailstogether with a screw mechanism;
2. to improve the lubricants reliability and reduce the time required for machine lubrication.

3. Equipment of wire-nailing machines with frequency converters of induction motors. This allows smooth handling of productivity from minimum to maximum. Currently, nailing machines have only two speeds due to changeable pulleys. This allows to increaseproductivity of nail making machines by an average by 10% due to choice of optimum speed.