site map русс.версиярусская версия
contacts  

 

 
AUTOMATIC MACHINES:
 
GENERAL INFORMATION

Automatic machines are intended for manufacture of elastic washers.
Host material is the steel wire of square, rectangular, trapezoidal section.

 
METHOD OF OPERATION:
The wire from unwinding device by means of assigning mechanism gives to the correct device which is carrying out editing in two planes. Then the wire is entered in clip mechanism which gives it to winding instrument.
Migration of tongs is carried out link gear. Magnitude of their migration is regulated continuous with a high exactitude.
Submitted to winding instrument the wire curls in a spiral from which coils of washers are sawed. A cut of coils of washers is carried out radially with stopping cutting knife inside of a spiral that ensures excellence cut.
The high exactitude of internal diameter and step is ensured simple with winding instrument consisting from mandrel, press roll and step-by-step paw.
The number of courses of automatic machines is regulated бесступенчато from a control panel.
Drive of automatic machines - tiristor.
The frame of automatic machine consists of the case and a curbstone.
In a curbstone the lubricated bath and a pump station for greasing are.
In chisel cases are mounted shafts of mechanisms, and on a forward plate - feeders, winding and cuting.
Greasing of automatic machines - centralized.
In a separate electrocase the electrical equipment is established.

 

 

 

GoldenStyle - web-design

 

Voting of site OUR PHONES
Wire-nail machines, Spring coiling machines, Washer making machines, Cutting straightening machines,
Machines for making metal screens, Machines for producing barbed wire, Line for manufacturing the slate nailp, Small-sized machine tools